New AEON Nova Elite 16 wood laser cutting machine
≈ MYR 47,790
Langen6833 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 6103 9...
Show
+49 6103 974445
Netherlands, Veghel
Netherlands, Veghel
Netherlands, Veghel
Netherlands, Veghel
Netherlands, Veghel
Netherlands, Veghel
Netherlands, Veghel
Netherlands, Veghel
Working range
1.600*1.000mm
Work table
Honeycomb + blade
Electric Z-axis table lift
200 mm (max. 120 kg)
Laser power
150 W peak CO2 glass tube
Laser class
1
Engraving speed
1,200 mm/s
Cutting speed
800 mm/s
Maximum acceleration speed
5G
Cutting thickness
0-30mm (depending on material)
Minimum engraving size
Minimum font size 1.0 mm x 1.0 mm
Maximum scanning precision
4000 DPI
Positioning accuracy
<=0.01 mm
Overlong material
Yes - through door openings at the front and rear
W-Lan
Yes
Autofocus
Integrated autofocus
Red dot positioning
Yes
Control unit
Ruida RD6445 controller with LCD display and keypad
Engraving software
RDWorks for Windows included / optional LightBurn for Win&Mac
Supported graphic format
DSP/DWG/AI/PDF/SC/DXF/HPGL/PLT/RD/SCPRO2/SVG/LBRN/ BMP/JPG/JPEG/PNG/GIF/TIF/TIFF/TGA
Compatible software
CorelDraw/Illustrator/AutoCAD
Air support
135W built-in compressor
Exhaust fan
500 W built-in exhaust fan
active water cooling
built-in water cooler S&A Chiller 5200
Input voltage
220 V alternating current 50 Hz
Machine size
2.180*1.590*1.125mm (on brakable castors and feet)
Machine weight
730 kg
Cutting of the following materials possible:
- Acrylic
- Wood (woods such as mahogany cannot be cut)
- leather
- plastics
- fabrics
- MDF
- cardboard
- paper
- corian
- foam
- fiberglass
- rubber
Engraving of the following materials possible:
- Acrylic
- wood
- leather
- plastics
- fabrics
- glass
- rubber
- cork
- bricks
- granite
- marble
- tile
- river rock
- bone
- melamine
- Phenolic
- Aluminum
- Stainless steel
*CO2 lasers only mark anodized or treated bare metals.
Arbeitsbereich
1.600*1.000mm
Arbeitstisch
Wabe + Klinge
Elektrischer Z-Achsen-Tischub
200 mm (max. 120 kg)
Laserleistung
150 W Peak CO2-Glasröhre
Laserklasse
1
Gravurgeschwindigkeit
1.200 mm/s
Schneidgeschwindigkeit
800mm/s
Maximale Beschleunigungsgeschwindigkeit
5G
Schnittstärke
0-30mm (abhängig von Material)
Minimale Gravurgröße
Minimale Schriftgröße 1,0 mm x 1,0 mm
Maximale Scanpräzision
4000 DPI
Positioniergenauigkeit
<=0,01 mm
Überlanges Material
Ja – durch Tür-Öffnungen vorne und hinten
W-Lan
Ja
Autofokus
Integrierter Autofokus
Rotpunk-Positionierung
Ja
Steuerung
Ruida Steuerung RD6445 mit LCD-Display und Keypad
Gravur-Software
RDWorks für Windows inklusive / optional LightBurn für Win&Mac
Unterstütztes Grafikformat
DSP/DWG/AI/PDF/SC/DXF/HPGL/PLT/RD/SCPRO2/SVG/LBRN/ BMP/JPG/JPEG/PNG/GIF/TIF/TIFF/TGA
Kompatible Software
CorelDraw/Illustrator/AutoCAD
Luftunterstützung
135W eingebauter Kompressor
Absaugung
500 W eingebauter Abluftventilator
aktive Wasserkühulng
eingebauter Wasserkühler S&A Chiller 5200
Eingangsspannung
220 V Wechselstrom 50 Hz
Maschinengröße
2.180*1.590*1.125mm (auf bremsbaren Rollen und Standfüßen)
Maschinengewicht
730 kg
Schneiden von folgenden Materialien möglich:
• Acryl
• Holz (Hölzer wie Mahagoni können nicht geschnitten werden)
• Leder
• Kunststoffe
• Stoffe
• MDF
• Karton
• Papier
• Korian
• Schaum
• Fiberglas
• Gummi
Gravieren von folgenden Materialien möglich:
• Acryl
• Holz
• Leder
• Kunststoffe
• Stoffe
• Glas
• Gummi
• Kork
• Ziegel
• Granit
• Marmor
• Fliese
• Flussfels
• Knochen
• Melamin
• Phenolisch
• *Aluminium
• *Edelstahl
*CO2-Laser markieren nur eloxierte oder behandelte blanke Metalle.