New Lissmac SBM-L 1000 G1S2 sheet metal deburring machine
Niederlangen6596 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 5939 9...
Show
+49 5939 940640
+49 5939 9...
Show
+49 5939 940650
Germany 
Germany, Niederlangen
Germany, Niederlangen
Germany, Eislingen
Germany, Eislingen
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
Germany, Location:cologne
Germany, Kirchheim
Germany, Kirchheim
Germany, Kirchheim
Germany, Kirchheim
workpiece width - max. 0,5 - 50 mm
sandingbelt width -- mm
weight of the machine ca. 2,5 t
working width 1000 mm
workpiece width - max. 0,5 - 50 mm
sandingbelt width -- mm
weight of the machine ca. 2,5 t
working width 1000 mm
workpiece width - max. 0,5 - 50 mm
sandingbelt width -- mm
weight of the machine ca. 2,5 t
working width 1000 mm
workpiece width - max. 0,5 - 50 mm
sandingbelt width -- mm
weight of the machine ca. 2,5 t
working width 1000 mm
workpiece width - max. 0,5 - 50 mm
sandingbelt width -- mm
weight of the machine ca. 2,5 t
working width 1000 mm
workpiece width - max. 0,5 - 50 mm
sandingbelt width -- mm
With the SBM-L 1000 G1S2, which works in the dry process, in alternating
operation
Steel, stainless steel and aluminum can be machined. She deburrs and rounds
the edges on the outer and inner contours of punched, laser, fine plasma or
water jet cut workpieces with a thickness of up to 50 mm
on both sides in just one operation.
* Two sanding units, 1 each on the top and bottom, remove spatter
and slight burrs on outside and inside edges of sheet metal.
* A total of four sanding belts, 2 each on the top and bottom
Underside, process the sheets on both sides at the same time. here
All edges are softened or rounded, depending on the tool settings.
* Machining on both sides saves time-consuming turning of the workpieces and
edit twice.
* All pairs of aggregates can be switched on/off separately depending on the
application as well as
to be set.
* Including Siemens S7 control:
- Easy and comfortable operation through intuitive user interface
- High operating security through 3 password-protected user levels
- Integrated program memory
- USB / RJ 45 interface for data exchange or connection of external
Components (e.g. barcode scanner)
- Direct entry of material thickness via touch panel
- All axes automatically adjust to preselected material thickness
- Standby position for deactivated aggregates
- Service-friendly (e.g. plain text error messages)
consisting of:
- Grinding machine SBM-L 1000 G1S2 (kit)
- 4x sanding belts SBM 1000 with bar P60 SiC
- Sanding belt SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F
- SBM-L tool wear compensation Siemens S7
- DDE 3002 dry suction
- Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133
** Further detailed technical data on request. The machine is in stock
Niederlangen available immediately.**
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Werkstückdicke - max. 0,5 - 50 mm
Schleifbandbreite -- mm
Maschinengewicht ca. 2,5 t
Arbeitsbreite 1000 mm
Werkstückdicke - max. 0,5 - 50 mm
Schleifbandbreite -- mm
Maschinengewicht ca. 2,5 t
Arbeitsbreite 1000 mm
Werkstückdicke - max. 0,5 - 50 mm
Schleifbandbreite -- mm
Maschinengewicht ca. 2,5 t
Arbeitsbreite 1000 mm
Werkstückdicke - max. 0,5 - 50 mm
Schleifbandbreite -- mm
Maschinengewicht ca. 2,5 t
Arbeitsbreite 1000 mm
Werkstückdicke - max. 0,5 - 50 mm
Schleifbandbreite -- mm
Maschinengewicht ca. 2,5 t
Arbeitsbreite 1000 mm
Werkstückdicke - max. 0,5 - 50 mm
Schleifbandbreite -- mm
Mit der im Trockenverfahren arbeitenden SBM-L 1000 G1S2 kann im Wechselbetrieb
Stahl, Edelstahl und Aluminium bearbeitet werden. Sie entgratet und verrundet
die Kanten an Aussen- und Innenkonturen vongestanzten, laser-, feinplasma- oder
wasserstrahlgeschnittenen Werkstücken mit einer Dicke von bis zu 50 mm
beidseitig in nur einem Arbeitsgang.
* Zwei Schleifaggregate, je 1 auf der Ober- bzw. Unterseite, entfernen Spritzer
und leichte Grate an Aussen- und Innenkanten von Blechen.
* Insgesamt vier Schleifriemen, je 2 auf der Ober- bzw.
Unterseite,bearbeitendie Bleche gleichzeitig auf beiden Seiten. Hierbei
werden alle Kanten entschärft oder verrundet, je nach Einstellung der Werkzeuge.
* Die beidseitige Bearbeitung erspart zeitintensives Wenden der Werkstücke und
zweimaliges Bearbeiten.
* Alle Aggregatpaare können je nach Anwendung separat zu- / abgeschaltet sowie
eingestellt werden.
* Inkl. Siemens S7-Steuerung:
- Einfache und komfortable Bedienung durch intuitive Benutzeroberfläche
- Hohe Bediensicherheit durch 3 passtwortgeschützte Benutzerebenen
- Integrierter Programmspeicher
- USB / RJ 45 Schnittstelle für Datenaustausch bzw. Anschluss externer
Komponenten (z.B. Barcode-Scanner)
- Direkteingabe der Materialdicke über Touchpanel
- Alle Achsen stellen automatisch auf vorgewählte Materialdicke ein
- Standby-Position für deaktivierte Aggregate
- Servicefreundlich (z.B. Klartext Fehlermeldungen)
bestehend aus:
- Schleifmaschine SBM-L 1000 G1S2 (kit)
- 4x Schleifriemen SBM 1000 mit Steg P60 SiC
- Schleifband SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F
- SBM-L Werkzeugverschleisskompensation Siemens S7
- Trockenabsaugung DDE 3002
- Standardverrohrung DDE 3002 / WDE 3002 für SMD 123, SMD 133
** weitere ausführliche technische Daten auf Anfrage. Die Maschine ist ab Lager
Niederlangen sofort lieferbar.**