ESAB UXL P EV 2000 plasma cutting machine
Location:stuttgart
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
Show
+49 89 38031644
Germany, Location:dresden
United Kingdom
Germany, Ahaus
Belgium, Deinze
Germany, Ahaus
Germany, Nürtingen
Plasma cutting system with accessories
The plasma cutting system consists of
1 piece Plasma cutting machine ESAB UXL P EV 2000 built in 2006
1 piece Power source Hypertherm Powermax 85
1 piece Vision T5 control with touchscreen operation
latest design
1 piece Dodek suction table
for large-format support cutting area 1500x3000mm
sequentially flap-controlled
1 piece Dodek cyclone suction system with Donaldson suction filter technology
fan suction capacity without resistance approx. 5400m3/h
Plasma system : MAX Series
SCOPE OF SUPPLY
Retrofit of CNC control
Controller VISION™ T5c
RETROFIT (AT SITE) OF EXISTING 1 PCE
RETROFIT (AT SITE) OF EXISTINGMACHINE
Next Generation Cutting Machine Controller
Retrofit & Modernization of the existing
Basic-Machine and the hereafter offered
Equipment will be done at site
Estimated working time and time schedule
according to agreement and consultation
of Retrofit dept
details see last page
of this document: conditions
Before implementing an Retrofit
a survey
at site by an qualified ECS technician
is recommended
Changes of the machine functions and/or
processes which have been implemented
after the first installation of the
machine
which hasn´t been executed by
ESAB CUTTING SYTEMS are not considered
in this offer and may cause a separate
arrangement
The customer has to provide lifting
facilities and transport equipment as
well as personal for assistance
Before start of the retrofitting works
the machine must be cleaned by the customer
Should during re-installation additional
defects occur
which can not guarantee a
perfect function
then
with agreement of
the customer
the additional spare parts
and time will be especially charged
If the installation or acceptance test has
to be extended due to customer"s reason
each day will be charged in addition acc
to our standard Service charges
We reserve the right to make technical
modifications and improvements without
notification
RETRO REPLACING BY VISION T5C 1 PCE
RETRO REPLACING BY VISION T5C(WINDOWS 10)
Retrofit to CNC-controller VISION T5c
Windows 10
Exchange of existing CNC-Controller
FOR MODERNISATION / RETROFITTING of
VISION PC
280B
290
390
500
501
510
520
(other's on request)
Basic controller VISION T5
(for up to 12 Stations)
Features of the Control
operationing assistant 'OP Wizard'
efforts for new operators significantly
Process Selector
Bright
wide
touch-screen
Monitoring of the arc voltage during plasma
cutting process enables accurate height
adjustment of torch
Dual-Processor design separates motion
control and process control from the operator
interface
Additional toggle switch for raising and
lowering tools
Advanced Easy Shape Library with
Interactive Graphical Preview features 88
shapes with optimization for lead-in/outs
small holes
and inner contours
Import parts from DXF / DWG files
and add optimized lead-in/out
and get the
best possible cut quality right at the control
DXF import specification
All existing layers and line types of the DXF
file will be imported. Solely the geometry
elements line
arc and circle are allowed for
cutting. All other geometry elements like
polygon
splines
blocks
measurements
etc. cannot be imported. Inner and outer
contours have to be closed and must not
contain double geometry elements
Hardware Specs
PC Based Controller Running with integrated
18.5" "Wide-Screen" Format Colour LCD
Touch-Screen with 1366 x 768 pixels
resolution
Two USB 2.0 Ports on front panel
8 Position Joystick
Speed Potentiometer
Standard toggle switches for lifting or
lowering tool on the machine
Integrated Ethernet (LAN) Port
CAN Bus I/O Controller
Integrated Emergency-stop pushbutton
Standards
DIN 2310-6
DIN EN 28206 (ISO 8206)
VDE 0100
DIN EN 60204-1
(VDE 0113 Part 1)
A current softwarebackup of the existing
controller is needed in case of order
The agreed delivery period begins
with the date of receipt
This features are available only
in connection with our modern
ESAB cutting torches
and may not be applicable for
outdated systems
VDU-TEXT IN GERMAN 1 PCE
Operator language German
SOFTWARE TRANSFER 1 PCE
Software transfer
Transfer of the existing software options
to the new controller as far as available
Remark
Older features or options might be modified
or discontinued
custom software need to be reprogrammed
(provided by the customer)
OPERATING INSTR. IN GERMAN 1 PCE
OPERATING INSTR. IN GERMAN(PAPER COPY AND CD ROM)
Operating manual
printed and on CD-ROM
in German
TECHNICAL DOCUMENTATION 1 PCE
TECHNICAL DOCUMENTATIONIN GERMAN (CD-ROM)
Technical documentation
on CD-ROM in German
consisting of
part lists and assembly drawings in German
wiring diagrams in German
TECHNICAL WORK TIME PER HOUR 20 PCE
Technical working time per hour
PRODUCTION WORK TIME PER HOUR 10 PCE
Production working time per hour
INSTALLATION EXCLUDED 1 PCE
The costs for installation and start-up are
NOT included
===========================================
The German Industry Federation conditions
in the version as amended from time to time
also apply to installations in Germany
Note
The necessary building site preparations and
services by the customer must be followed in
accordance with the ESAB guidelines
(machine installation plans)
An overhead crane / forklift or other necessary
lifting gear including authorized operating
personnel must be supplied free of charge
by the customer if required
Track installation
The welding of the track mounting plates on
the base support (IPB) is generally performed
by the customer
PACKING LARGE 1420X760X700 1 PCE
PACKING LARGE 1420X760X700ON ONE PALETTE
ESAB standard packing "large"
on one palette
max. 1420 x 760 x 700 mm
Find more here
show contacts
Contact us at
show contacts