Keyence IM-7030T other laboratory equipment
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Location:hamburg
Germany, Heidenheim
Germany, Grenzach-Wyhlen
Germany, Bünde
Germany, Pullach
Germany, Grenzach-Wyhlen
Germany, Location:heidelberg
Germany, Grenzach-Wyhlen
Germany, Egenhofen
Germany, Egenhofen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Lörrach
Germany, Lörrach
Germany, Grenzach-Wyhlen
Germany, Pullach
Laboratory equipment parts
Controller: IM-7000
Image pickup device: 1" 6.6 megapixel monochrome CMOS
Display: 10.4" LCD monitor (XGA 1024×768)
Light receiving lens: Double telecentric lens
Illumination system: Telecentric transmissive, top light, four-division multi-angle illumination (motorized), slit ring illumination (motorized)
Measurement modes: Wide-field, High-precision
Wide-field measurement area: 300 × 200 mm (quadangle R50)
High-precision measurement area: 225 × 125 mm
Minimum display unit: 0.1 µm
Measurement accuracy (wide-field, without stage move): ±1 µm
Measurement accuracy (high-precision, without stage move): ±0.5 µm
Measurement accuracy (wide-field, with stage move): ±2 µm
Measurement accuracy (high-precision, with stage move): ±1.5 µm
Linked measurement accuracy: ±(7 + 0.02L) µm (wide-field), ±(4 + 0.02L) µm (high-precision)
Measurable area (XY, stage): 90 × 90 mm
Maximum measurement depth: 30 mm
Light probe diameter: 3 mm
Measuring force: 0.015 N (light probe), 0.3 N (height measurement)
Repetition accuracy: ±2 µm
Measurement range (Z): 0–75 mm
Measuring position accuracy (XY): ±0.2 mm
Minimum display unit (height): 1 µm
Measurable area (XY) wide-field mode: 145 × 95 mm
Measurable area (XY) high-precision mode: 107.5 × 95 mm
XY stage: Motorized, movement range 200 × 100 mm, max load 5 kg
Z stage: Motorized, movement range 75 mm
External remote input: Non-voltage input (contact/solid-state)
External output: PhotoMOS, OK/NG/FAIL/MEAS, rated load 24 VDC, 0.5 A
Interface: LAN RJ-45 (10/100/1000BASE-T), USB 2.0 Series A (6 ports)
Record storage: HDD 500 GB
Ambient temperature: +10 to +35°C
Relative humidity: 20–80% RH (no condensation)
Pollution degree: 2
Over-voltage category: II
Power supply voltage: 100–240 V, 50/60 Hz
Weight head: 31 kg
Controller weight: ~8 kg
application type: Measuring
Location: Latvia
machine type: Optical Measurement Machine