New MEP Halbautomat Shark 281 SXI evo metal band saw
Niederlangen6596 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 5939 9...
Show
+49 5939 940640
+49 5939 9...
Show
+49 5939 940650
Germany 
saw band length 2950 mm
table height -- mm
280 mm
2950 x 27 x 0,9 mm
280 x 200 mm
230 mm
190 mm
180 x 180 mm
180 mm
120 mm
110 x 110 mm
110 mm
36 / 72 m/min
powerful, electro-hydraulic, semi-automatic band saw machine for
Miter cuts from 0 to 60 left.
Control modes:
Semi-automatic operation (start / stop position of the saw bow is controlled by
the Keyboard programmed. Vice closes / opens automatically, saw bow
is automatically returned to the beginning of the cut)
-Stable, torsion-resistant and low-vibration saw frame made of cast steel
- Carbide band guides for maximum cutting precision
-Large dimensioned deflection discs, adjustable made of cast steel
-Control panel on vertical post, swiveling, contains all operating elements
-Control with soft-touch keyboard, backlit display for display
all machine parameters and messages in plain text:
Number of cuts (piece counter) + cutting time + power consumption of the
Saw band motor + saw band tension in kg (minimum band tension = 900 kg) +
Saw frame position (Y-axis) / alarms / faults (description and causes) +
Diagnosisâ¦
-Saw band tension with band tension control and indication on the display by
means of electronic converter
-Underframe with lockable door and removable coolant tray, electric coolant
pump.
-Vise with quick adjustment
-Schipping brush for cleaning the saw band
-Machine is prepared for all options (see price list). (Electric wire,
Software etc.)
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sägebandlänge 2950 mm
Tischhöhe -- mm
Schnittbreite 280 mm
Sägebandabmessungen 2950 x 27 x 0,9 mm
Schnittbereich bei 90 Grad: flach 280 x 200 mm
Schnittbereich bei 90 Grad: vierkant 230 mm
Schnittbereich bei 45 Grad: rund 190 mm
Schnittbereich bei 45 Grad: flach 180 x 180 mm
Schnittbereich bei 45 Grad: vierkant 180 mm
Schnittbereich bei 60 Grad: rund 120 mm
Schnittbereich bei 60 Grad: flach 110 x 110 mm
Schnittbereich bei 60 Grad: vierkant 110 mm
Bandgeschwindigkeit 36 / 72 m/min
kräftige, elektrohydraulische, halbautomatische Bandsägemaschine für
Gehrungsschnitte von 0 bis 60 links.
Steuerungsmodi:
Halbautomatischer Betrieb (Start- / Stopp-Position des Sägebogens wird über die
Tastatur programmiert. Schraubstock schliesst / öffnet automatisch, Sägebogen
wird zum Schnittanfang automatisch zurück geführt)
-Stabiler, verwindungssteifer und vibrationsarmer Sägerahmen aus Stahlguss
-Hartmetall-Bandführungen für höchste Schnittpräzision
-Gross dimensionierte Umlenkscheiben, nachstellbar aus Stahlguss
-Bedienpult auf Vertikalpfosten, schwenkbar, beinhaltet sämtliche Bedienelemente
-Steuerung mit Soft-Touch-Tastatur, hintergrundbeleuchtetem Display zur Anzeige
sämtlicher Maschinenparameter und Meldungen im Klartext:
Anzahl der Schnitte (Stückzähler) + Schnittzeit + Stromaufnahme des
Sägebandmotors + Sägebandspannung in kg (Mindestbandspannung = 900 kg) +
Sägebügelposition (Y-Achse)/Alarme/Störungen (Beschreibung und Ursachen) +
Diagnostik…
-Sägebandspannung mit Bandspannkontrolle und Anzeige auf dem Display mittels
elektronischem Umrechner
-Untergestell mit abschliessbarer Tür und entnehmbarer Kühlmittelwanne,
elektrischer Kühlmittelpumpe.
-Schraubstock mit Schnellverstellung
-Späneräumbürste zur Reinigung des Sägebandes
-Maschine ist für sämtliche Optionen (sh. Preisliste) vorbereitet. (Kabel,
Software etc.)