Quick-Tech i60 twin machining centre
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Kaiserslautern
Main spindle bore: 60 mm
Sub spindle bore: 42 mm
Max. turning length: 300 mm
SpeedsMain spindle: 4000 rpmSub spindle: 4000 rpmDriven tools: 4000 rpm
Main spindle: 4000 rpm
Sub spindle: 4000 rpm
Driven tools: 4000 rpm
SpindlesMain spindle indexing: 0.001°Sub spindle indexing: 0.001°Hydraulic spindle brake (main & sub)Synchronization of spindle rotation and positioning
Main spindle indexing: 0.001°
Sub spindle indexing: 0.001°
Hydraulic spindle brake (main & sub)
Synchronization of spindle rotation and positioning
Tool stationsMain spindle side: 6 external turning, 5 internal turningSub spindle side: 3 external turning, 4 internal turningDriven tools: 12 stations
Main spindle side: 6 external turning, 5 internal turning
Sub spindle side: 3 external turning, 4 internal turning
Driven tools: 12 stations
Processing capabilities4-axis simultaneous machiningFull axis programming directly from the controlAir blow function (M-code)Part ejection detection
4-axis simultaneous machining
Full axis programming directly from the control
Air blow function (M-code)
Part ejection detection
WorkholdingMain spindle chuck: Ø185 mmSub spindle chuck: Ø173 mm
Main spindle chuck: Ø185 mm
Sub spindle chuck: Ø173 mm
Machine equipmentMachine leveling screws and platesLED working light3-color signal towerAutomatic central lubrication systemCoolant tank and coolant level sensorHigh-pressure coolant pump 30–40 bar380V/220V transformerBasic tool kitOperator manual, programming manual, electrical diagrams, PLC documentation
Machine leveling screws and plates
LED working light
3-color signal tower
Automatic central lubrication system
Coolant tank and coolant level sensor
High-pressure coolant pump 30–40 bar
380V/220V transformer
Basic tool kit
Operator manual, programming manual, electrical diagrams, PLC documentation
Control system: Mitsubishi M7010.4” color display; MPG handwheel program checkAbsolute/incremental programming; ISO programmingAutomatic machine power-off functionThread cutting cycle (G92); rigid tappingConstant cutting speed (G96/G97)Production time display & part counterJog movement for X, Z, Y, W axes; C1 and C2 contouring for turning/millingMinimum input increment: 0.001 mm80 tool geometry & correction positionsProgram loading via memory card or USB; network connectivityChamfer & radius programming; radius compensationAbsolute motors (no homing required); self-diagnosis functionsSpindle synchronizationThread cutting with driven tools; thread cutting on sub spindleProgramming help functions; 2D program simulationPLC editing capabilityGear cutting function includedDriven tool orientation
10.4” color display; MPG handwheel program check
Absolute/incremental programming; ISO programming
Automatic machine power-off function
Thread cutting cycle (G92); rigid tapping
Constant cutting speed (G96/G97)
Production time display & part counter
Jog movement for X, Z, Y, W axes; C1 and C2 contouring for turning/milling
Minimum input increment: 0.001 mm
80 tool geometry & correction positions
Program loading via memory card or USB; network connectivity
Chamfer & radius programming; radius compensation
Absolute motors (no homing required); self-diagnosis functions
Spindle synchronization
Thread cutting with driven tools; thread cutting on sub spindle
Programming help functions; 2D program simulation
PLC editing capability
Gear cutting function included
Driven tool orientation
Additional equipment (not part of the base machine)
Chip conveyor
Bar feeder VITO 56 (3 m)
Finished part conveyor
application type: Turning
Location: Slovenia
machine type: Horizontal Turning Machine
control unit brand: MITSUBISHI
Control Brand: MITSUBISHI
Control Model: M70
Number of Axes: 6
Counter Spindle: Yes
Driven Tools: Yes
Marke: Quick-Tech