Trumpf Trumatic 7000 K02 FMC laser cutting machine
Ludwigsburg
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 7141 48...
Show
+49 7141 4882799
+49 176 246...
Show
+49 176 24697022
Germany 
Germany, Location:stuttgart
Germany, Lübeck
Germany, Lübeck
Germany, Location:munich
Germany, Lübeck
Germany, Leipzig
Germany, Freiberg am Neckar
Germany, Location:stuttgart
€900
≈ MYR 4,329
≈ $1,056
Germany, Bad Saulgau
Germany, Backnang
Germany, Kaiserslautern
Germany, Kaiserslautern
€760
≈ MYR 3,656
≈ $891.60
Germany, Bad Saulgau
Germany, Backnang
Germany, Pullach
Year: 2011
Machine hours: about 69.000 / 65.500 / 15.250 h
Standard equipement
- Stable C-frame for easy access
- Riding ball tables
- Linear magazine for tool stations and clamps
- 21 tool stations, 4 clamps – foot switch for closing of clamps
- Flap for punch parts 500 x 500 mm incl. sensor
- FocusLine
- NitroLine
- FastLine
- Additional Xp- and Yp- axis
- Ejector cylinder for laser parts
- Retrofit capability for conveyor belts (punching and laser side)
- Fast flap for laser parts 500 x 500 mm incl. sensor
- Liftable laser cutting support
- Slag cone detection
TRUMPF Laser
- CO2-Laser TruFlow 2700 incl. optimized standby
- Maintenance-free radial turbine blower
- Radio-frequency excitation
- Laser control TASC 3
Cutting head
- Lens cutting head with 170mm focal length
- Universal quickchange device for cutting head (UTI) with bus connection
- ControlLine
Punching head
- Electro-hydraulic punching head
- Rotatable single tool adapter 360° Rotation
- Presser foot force manually adjustable
- Programmable presser foot (active / passive / repositioning)
- Tool length compensation
- Spray tool lubrication
- Chip vacuum system with state monitoring
- Calculation of filling level in the punching console
- Level monitoring of tapping and tool lubrication
Control
- Control based on Rexroth IndraMotion MTX
- 15" TFT colour screen
- Teleservice by internet
- Automatic shut down device
- Production plan
Data transfer
- USB interface, RJ45 network connection
Safety
- CE-marking
- Bidirectional lightguards
- Quick switch-off hydraulic
- Sheet collision detection
Advanced equipment
- TruFlow 4000
- Function MultiTool
- Function MultiBend
- Function tapping
- Function marking
- Function Engraving
- Function Deburring and Rolling
- Function Softpunch
- Active die
- Spray lubrification for die
- Height movable clamps
- Repositioning cylinders
- Brush tables with loading and unloading aid
- Blow-out device small parts
Automation
Sheetmaster
Standard equipement
- Suction frame 3000 x 1500
- Peeler cup
- Vacuum sensor
- Central lubrification
- Sheet thickness sensor for double sheet check
- Clamp closing automatically
GripMaster
Standard equipement
- Sheet skeleton with sensor
- Scissor table 400 mm
- Sheet skeleton pallet tiltable 3000 x 1500
Baujahr: 2011
Maschinenstunden: ca. 69.000 / 65.500 / 15.250 h
Standardausstattung
- Stabiler, gut zugänglicher C-Rahmen
- Mitfahrende Kugelrollentische
- Linearmagazin für Werkzeugstationen und Spannpratzen
- 21 Werkzeugstationen, 4 Spannpratzen - Fußtaster zum Pratzenschließen
- Klappe für Stanzteile 500 x 500 mm inkl. Sensor
- FocusLine
- NitroLine
- FastLine
- Zusätzliche Xp- und Yp- Achse
- Ausdrückzylinder Laserteile
- Nachrüstfähigkeit Teileförderbänder (Stanz- und Laserseite)
- Schnelle Klappe für Laserteile 500 x 500 mm inkl. Sensor
- Anhebbare Laserschneidauflage
- Schlackekegelerkennung
TRUMPF Laser
- CO2-Laser TruFlow 2700 inkl. LensLine und optimiertem Standby
- Wartungsfreies Turboradialgebläse
- Hochfrequenzanregung
- Lasersteuerung TASC 3
Schneidkopf
- Laserschneidkopf mit 170mm-Linse
- Universelle Schnellwechseleinrichtung (UTI) mit Busanbindung
- ControlLine
Stanzkopf
- Elektro-hydraulischer Stanzkopf
- Hydraulische Einzelwerkzeug-Aufnahme 360° Rotation
- Manuell einstellbare Niederhalterkraft
- Programmierbarer Niederhalter (aktiv / passiv / nachsetzen)
- Werkzeuglängenkompensation
- Sprühschmierung Stempel
- Stanzbutzenabsaugung
- Errechnung Füllstandhöhe in der Stanzkonsole
- Niveauüberwachung Gewindeformen und Werkzeugschmierung
Steuerung
- Steuerung auf Basis Rexroth IndraMotion MTX
- 15" TFT-Farbbildschirm
- Teleservice per Internet
- Abschaltautomatik
- Produktionsplan
Datenübertragung
- USB-Schnittstelle, RJ45 Netzwerkanschluss
Sicherheit
- CE-Kennzeichnung
- Zweistrahlige Lichtschranken
- Schnellabschaltung Hydraulik
- Aufwölbungserkennung
Erweiterte Ausstattung
- TruFlow 4000
- Funktion MultiTool
- Funktion MultiBend
- Funktion Gewindeformen
- Funktion Gravieren
- Funktion Signieren/Schnelles Sicken
- Funktion Entgrat- und Rollentechnologie
- Aktive Matrize
- Sprühschmierung Matrize
- Höhenbewegliche Spannpratzen
- Nachsetzzylinder
- Bürstentische mit Be- und Entladehilfe
- Ausblasvorrichtung Kleinteile
Automatisierung
Sheetmaster
Standardausstattung
- Saugerrahmen 3000 x 1500
- Abschälsauger
- Vakuumsensorik
- Zentralschmierung
- Blechdickenmessgerät zur Doppelblechkontrolle
- Automatisches Pratzenschließen Maschine
GripMaster
Standardausstattung
- Restgitterzangen mit Sensorik
- Scherenhubtisch 400 mm
- Restgitterpalette kippbar 3000 x 1500