Amada LC 3015 F1 NT laser cutting machine
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Kaiserslautern
Germany, Ludwigsburg
Germany, Pullach
Germany, Kaiserslautern
€4,000
≈ MYR 19,150
≈ $4,658
Germany, Velbert
Germany, Lübeck
Laser cutting machine parts
Machine Benefits
Technical Machine Benefits
Power required: 98 kva
Capacity: 4 kw
Laser resonator: af4000i-b
Transformer: marx tg 516
Extra Information
Machine with transport box (L x W x H): 7120×3150×2370 mm
Weight (with transport box): 13,500 kg
Laser Resonator (L x W x H): 2460×1140×1965 mm
Laser Resonator Weight: 1,300 kg
Combined Unit (L x W x H): 2332×1638×2201 mm
Combined Unit Weight: Approximately 1,750 kg
Transformer (L x W x H): 950×800×950 mm
Transformer Weight: 484 kg
Pallet Changer (L x W x H): 3868×2352×1010 mm
Pallet Changer Weight (without liftable ball supports): 2,450 kg
Pallet Changer Weight (with liftable ball supports [option]): 3,500 kg
Electrical Connections
Total Power Connection of the System: 400 V / 127 KVA
Transformer Power Connection: 400 V / 89 kVA / 160 A
Combined Unit Power Connection: 400 V / 38 kVA /55A
Laser Resonator Power Connection: 200 V / 55 KVA
Control and Drives Power Connection: 200 V / 34 kVA
Operating Voltage: 3×400 V(±10%)/PE/50 Hz
Max. Current Draw: 55 A
Transformer Rated Power: 89 KVA
Transformer Rated Primary Voltage: 3×400 V(±10%)
Transformer Rated Secondary Voltage: 3×200 V
Transformer Rated Primary Current: 132 A
Transformer Rated Secondary Current: 257 A
Compressed Air and Gas Requirements
Total Compressed Air Requirement (air not used as cutting gas): 7 bar; 69.6 m 3/h
Total Compressed Air Requirement (air used as cutting gas): Max. 9.7 bar; 132.6 m 3/h
Compressed Air for Machine Functions ("Cooling Cut" and "Oil Shot"): 6 bar; 18 m 3/h
Compressed Air for "ECO CUT": 6 bar; 18 m 3/h
Compressed Air for Fume Extraction System DELTAComp 1500-8/9: 5 bar; 5.6 m 3/h
Laser Gas Consumption: 10 liters per hour
Cutting Gases: Oxygen, Nitrogen, and compressed air (if used as cutting gas) are required.
Environmental and Location Requirements
Operating Room Temperature: +15 to +35 °C
Room Height: At least 4 m
Lighting: At least 500 Lux
Humidity: Less than 75% (without dew condensation)
Vibrations: Must be resistant to seismic acceleration below 0.05 G (0.49 m/s 2) with an amplitude below 5 µm.
Foundation Load Capacity: ≥49 kN/m 2
application type: Cutting
Location: Germany
machine type: CO2 Laser Cutting Machine
Number of Axes: 3