New AL-KO ALKO Entstauber APU 250P + Prodeco E 55 Vertical dust chip extractor
≈ $40,280
Langen6833 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 6103 9...
Show
+49 6103 974445
Germany, Volkach
Germany, Location:berlin
Germany, Egenhofen
Germany, Egenhofen
Germany, Egenhofen
Germany, Langen
Germany, Langen
Germany, Langen
Germany, Langen
Germany, Langen
Germany, Aalen
Germany, Langen
Germany, Langen
Germany, Langen
Germany, Langen
Germany, Langen
Germany, Langen
Germany, Langen
Germany, Langen
Germany, Langen
Motor power: 7.5 kW / 3 Ph / 400 V / 50 Hz, Suction nozzle: NW 250 mm, nominal volume flow: 3,534 m³/h according to GS-HO-07, max. volume flow: 4,900 m³/h, negative pressure at Vnenn.: 2,451 Pa, filter surface: 22.4 m², compressed air cleaning, incl. integrated pre-separator, incl. integrated automatic extinguishing system, optional with free-flow inverter, optional side discharge,
incl. mounted Prodeco E55 Nano vertical briquetting press 55 mm briquette
5.5 kw main motor, 1.1 kW permanent agitator, 1.1 kW pre-compacting screw, sperate Siemens PLC control,
approx. 7 cycles per minute at full machine utilization; 3 cylinders; service hatch; max. Length of each discharge 50 mm; 1 capacity probe; bottom of hopper equipped with permanent agitator and screw mixer for material feeding and pre-compaction; automatic adjustment of material feed with sensor for briquette length monitoring on the discharge gripper, thus always briquettes of the same length regardless of material, device for end of cycle; Siemens touch screen PLC; counter; position control of the machine via LEDs; preheating system for cold environments; temperature and oil level probe; max. Moisture content 15%
Motorleistung: 7,5 kW / 3 Ph / 400 V / 50 Hz, Ansaugstutzen: NW 250 mm, Nennvolumenstrom: 3.534 m³/h nach GS-HO-07, max. Volumenstrom: 4.900 m³/h, Unterdruck bei Vnenn.: 2.451 Pa, Filterfläche: 22,4 m², Druckluftabreinigung, inkl. integriertem Vorabscheider, inkl. integrierter Löschautomatik, optional mit Frequemzumrichter, optional seitliche Ausblasung,
inkl. untergebauter Prodeco E55 Nano vertikal Brikettierpresse 55 mm Brikett
5,5 kw Hauptmotor, 1,1 kW Permanent-Rührwerk, 1,1 kW Vorverdichterschnecke, sperate Siemens SPS Steuerung,
ca. 7 Zyklen pro Minute bei voller Auslastung der Maschine; 3 Zylinder; Serviceluke; max. Länge jedes Ausstoßes 50 mm; 1 Kapazitätssonde; Boden des Trichters mit Permanent-Rühwerk und Schneckenmischer für die Materialbeschickung und Vorverdichtung ausgestattet; Automatische Einstellung der Materialzufuhr mit Sensor zur Brikettlängenüberwachung an der Austragungszange, dadurch materialunabhängig immer gleichlange Briketts, Vorrichtung für das Zyklusende; Siemens Touch - Bildschirm PLC; Zähler; Positionskontrolle der Maschine über LEDs; Vorwärmsystem für kalte Umgebungen; Temperatur- und Ölstandssonde; Max. Feuchtigkeitsgehalt 15%