Weinig Unicontrol 10-5 door manufacturing equipment
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Slovakia, Kežmarok
Italy, SAN GIOVANNI AL NATISONE (UD)
Belgium, Heule (Kortrijk)
Location: DE
Spindle Power: 11 kW
Working height (longitudinal machining): 40–100 mm
Working height (cross machining): 40–100 mm (counter wood height 80 mm)
Workpiece length (longitudinal): min. 220 mm + 2 x tenon length
Workpiece length (cross): min. 275 mm + 1 x tenon length with 320 mm tool diameter
Feed speed: 3–25 m/min
Workpiece clamping: 2 clamping claws
Length stop: with scale and reading magnifier for frame or sash outer dimensions
Counter: pneumatically clocked, 4 positions (not for studio windows), up to wood height max. 80 mm
Double part package: single or double part feeding, with cross separation and retention system
1st piece (lying on the stop) wood width: 55–90 mm
2nd piece wood width: 130 mm
Feed roller spacing: 100/120 mm
Feed roller width: 30/50 mm
Feed roller diameter: 95 mm
Tool swing: max. 400 mm
Axial adjustment: pneumatic against 4-fold turret
Tool clamping length: 320 mm
Axial adjustment range: 240 mm
Tool zero swing circle: 130–140 mm
Axial/radial adjustment range: 240/80 mm
Number of tool positions: 4 x 80 mm
Tool zero circle: 130–140 mm
Radially indexed: 2 positions
Axially indexed: 2 positions
Radial adjustment range: 125 mm
Restriction: wood thickness max. 120 mm
At -60°: workpiece width max. 110 mm with 80 mm tenon length, or max. 150 mm with counter profiles
working width: 40–220 mm
Capacities
Feed (cross machining)
Feed (longitudinal machining)
Feed speed: 4–18 m/min (infinitely variable via frequency converter)
Machining units
Crosscut saw
1st spindle with tenon and slot
Spindle speed: 3250 rpm
Tool swing: max. 320 mm
Axial adjustment: hydraulic
1st profiling spindle
Spindle speed: 6000 rpm
Tool clamping length: 320 mm
Axial adjustment: hydraulic
2nd profiling spindle
Spindle speed: 6000 rpm
Tool diameter: max. 232 mm
Tool clamping length: 320 mm
Axial/radial adjustment range: 240/80 mm
Number of tool positions: 4 x 80 mm
Axial adjustment: hydraulic
Mechanical spindle brakes
For profiling spindle(s)
For crosscut saw and profiling/sawing units
Profile milling unit (horizontal
top
in front of last profiling spindle)
Spindle speed: 5850 rpm
Tool swing: 130 mm
Tool clamping length: 40 mm
Axial adjustment range: 52 mm
Profile milling unit (vertical
right
at end of machine)
Radially indexed: 2 positions
Axially indexed: 2 positions
Spindle speed: 5850 rpm
Tool swing: 210 mm
Tool clamping length: 160 mm
Axial adjustment range: 90 mm
Radial adjustment range: 100 mm
Length tenoning and slotting spindle (640 mm tool clamping length
instead of 320 mm spindle)
Spindle speed: 2925 rpm
Number of tool positions: 8 x 80 mm
Axial adjustment range: 560 mm
Additional equipment
Laser guide light for crosscut saw for section detection
Studio window device
Swiveling length stop +/- 60° with electronic digital display and pneumatic clamping
Sliding counter bar
Special pressure for slanted part production
Milling package
Synchronization device with automatic immersion (on 1st profiling spindle)
Support rail with sliding belt
High/low clocked feed roller up to the 2nd profiling spindle to shorten the milling path
Software extension with 100 freely programmable milling types
Two axially clocked feed rollers opposite both profiling spindles for production of narrow
short parts
Rung guide
Automatically clocked guide bar in the stop for rung production
Rung support bar from above in the area of the vertical-right profile milling unit at the end of the machine
Electronic height adjustment for feed with electronic digital display
Automatic turning system for one-man operation
including conveyor be