MAN D2676LE423 (i6-800) marine engine for MAN
Hörsching6999 km from you
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+358 50 53...
Show
+358 50 5345498
+358 9 231...
Show
+358 9 23165797
Austria 
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Austria, Hörsching
Italy, Calenzano (FI)
Austria, Hörsching
Belgium, TEMPLOUX
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215
02 units
Marine diesel engine
D2676LE423 (i6-800)
Performance data .
Rated power 588 kW
Rated power 800 PS
Speed 2300 rpm
Bore 126 mm
Stroke 166 mm
Displacement 12,42 liter
Rated torque 2441 Nm
Maximum torque 2674 Nm
at speed 1400-2000 rpm
Engine description
Operation profile up to 1000 hours per year at a maximum of 20 % of time at full load | average load < 50 %
Construction four-stroke marine diesel engine, direct injection, SAE 1 flywheel housing
Cylinders 6 cylinders in line, single cylinder heads with wet replaceable cylinder liners
Air system single-stage turbocharger with charge air intercooler and wastegate
Cooling system seawater cooled charge air cooler and plate heat exchanger by rubber impeller pump
Oil system force-feed lubrication by gear pump, lubricating oil cooler in cooling water circuit of the engine
Fuel system Common Rail injection system with high pressure pump and EDC control, fuel to DIN EN 590
Auxiliary PTO PTO for hydraulic pump 16 cm.
Alternator three-phase generator with rectifier and transistorized governor, 28 V, 110 A
Starting system solenoid operated electric starter, 24 V, 5.5 kW
Service oil change interval 400 operating hours, average TBO 5.000 operating hours
Classification ---
Exhaust status IMO Tier II, RCD 2013/53/EC, RCD 94/25/EC, EPA Tier 3 recreational, 97/68/EC
. values at rated power . Tolerance +5% according to ISO 3046, diesel fuel to DIN EN 590 . values on propeller curve
D2676LE423 (i6-800)
A - overall width............ 986 B - overall length........... 1795 C - overall height........... 1096 D - above crank shaft.... 674 E - length to flywheel.... 1527 Engine weight (dry)....... 1215